Click here for more information

1093°C 600V Vacuum Cable

• Sizes range from 24 to 6 AWG
• Designed for extremely high-temperature applications
• Virgin S2 yarns or Nextel 304 insulations available
• This cable will perform where all others fail.
• Nickel overbraid shield is standard, stainless steel is also available
• The cable is easy to bend and work with and is terminated with conventional tools
• Nickel 200 is standard conductor material for 1093°C.

Click here for more information

538°C (1000°F) MTG Fluid/Oil Resistant Extra-Flexing High Temperature Cable Single Conductor

• Operates in temperatures up to 538°C (1000°F)
• UL/CSA 450°C (842°F).
• Fluid and oil resistant conductors and jacket
• Designed around Military Specification missile lead wire
• Grade A (Pure Nickel 200) also available
• Available in shielded pairs, triads or overall shield
• Additional cable armor available upon request
• Passes ETL Circuit Integrity Flame Test
• Solves most difficult high temperature applications where all other cables have failed

Click here for more information

250°C (482°F) PFA/PFAH Teflon® Insulated Lead Wire/Power Cable 600V Single Conductor

• Temperature range (-80° C to +250° C).
• PFA sets the standard in harsh environments
• Teflon PFA offers high dielectric strength, a low loss dielectric constant, low loss factors, and extremely high specific resistance
• PFA and PFAH are 20% smaller in diameter than braided cables allowing more circuits per conduit
• Multi-conductor cables and 300 Volt lead wire also available
• The overall diameter of PFA Teflon is less than XLP or PVC
• Fully pigmented insulation in bright colors aids in positive identification
• Standard color is Black
• PFA and PFAH lead wires are 100% glass-free and is OSHA acceptable
• Produces very little smoke when burned

Click here for more information

250°C (482°F) SRML Silicone Rubber Motor Lead Wire 600V Single Conductor

• Temperature range of -65°C to + 250°C
• UL Recognized 18-10 AWG as Internal Wiring of Appliances and Fixtures
• CSA Certified as equipment wire.
• Applications include wiring of motors, fixtures, appliances, etc
• Sil-V silicone rubber is very resistant to extremely low temperatures
• Sil-V insulated cables resistance to chemicals is excellent and a table is available to determine useful life in oils, bases, hydraulic fluids and solvents
• Fully pigmented jackets are available in any color
• These cables are also available in multi-conductor flexible cables and 300 Volt rating for added cost advantages
• Nickel-plated copper is standard conductor material.
• Pure nickel available upon request.

Click here for more information

200°C (392°F) SRML Silicone Rubber Flexible Motor Lead Wire - Silicone Rubber/Glass Braid 600 Volt Single Conductor

• SRML is suitable for continuous operation at 200°C and short-term exposure to temperatures as high as 675°C (non UL).
• UL Listed as Fixture Wire per NEC 402 (AWG 18-14)
• UL Recognized as Appliance Wire/Leads for Hazardous location motors 16 AWG through 750 MCM
• 300 Volt also available
• Available in multi-conductor cables, shielded, thermocouple alloys, strength members
• Gives off lower smoke and less toxic gasses when burned than other conventional cables utilizing other insulating material
• Primary insulation is a modified silicone rubber and the cable is augmented with a glass braid treated with a heat and moisture resistant finish

Click here for more information

200°C (392°F) Building Wire Type FEP and FEPB 600 Volt Single Conductor

• Temperature range -85°C through +200°C
• UL Listed lead and power cable insulated with FEP Teflon
• FEP insulation exhibits excellent high-temperature resistance, non-stick characteristics, weather resistance and low temperature flexibility
• FEP is a single extrusion of FEP Teflon
• FEPB has an additional impregnated glass fiber braid for mechanical protection
• Various colors available
• Interlocked armor available upon request

Click here for more information

200°C (392°F) Heavy-Duty Flexible Power Cable 600 Volt For Hazardous Location Motors Single Conductor

• SRK cables are suitable for continuous operation at 200°C and short-term exposure to temperatures as high as 675°C.
• This conductor is 100% pure copper electroplated with a coating of pure tin for improved connector terminations and reduced oxidation
• Primary insulation is a modified silicone rubber
• Pass the Underwriters Laboratories Vertical Wire Flame Test, VW-1 and the MIL-W-16878 specifications for flammability and pass the IEEE-383 1974
• UL Recognized for hazardous location motors.
• Gives off lower smoke and less toxic gases when burned
• Available in 26 AWG through 1000 MCM.
• 300 Volt also available.
• Available in multi-conductor cables, shielded, thermocouple alloys, strength members.

Click here for more information

150°C (302°F) Building Wire Tefzel Insulated 600 Volt Type Z or Type ZW Single Conductor

• Temperature range of -65°C to +150°C
• UL listed as type Z or ZW
• Insulated conductors are 30% smaller in diameter than conventional 150°C wires
• Tefzel® insulated cables cost less than conventional PTFE or FEP Teflon® insulated wires size for size
• ZW is wet rated suitable for use in wet locations and submersible applications.
• produce very little smoke when burned
• Chemically inert to nearly all industrial chemicals and solvents
• Meet NEC articles: 310, 340, 402 and 725
• Meet NEMA HP-100, WC-3, WC-5, Mil-Specs Mil-W-22759/16-19, MIL-C27500, Mil-C-17, IEEE Standard 1 Standard 323, Standard 383-1974
• Meet NFPA Standard 258 (smoke) UL Subject 13, UL Subject 83, and UL Subject 94 as well as various appliance wiring style numbers
• Superior dielectric properties, is abrasion resistant, heat resistant and its durability is second to none
• Its flexible nature and small diameter profile provides for easy, economical installations

Click here for more information

150°C (302°F) Hermetic Motor Lead Wire 600 Volt Tefzel® 750 Insulation

• Temperature range of -65°C to +150°C.
• 30% smaller in diameter than the polyester film insulated Hermetic Lead cables allowing installation in tight places
• Thermal Wire's Hermetic Motor Lead Wire is designed to replace DMD hermetic motor lead wire
• The construction is UL Recognized for this application and meets all of the requirements for refrigeration compressors
• Offers ease of stripping and termination that DMD cables lack
• Produces very little smoke when burned
• Chemically inert to nearly all industrial chemicals and solvents
• Flexible nature and small diameter profile provides for easy, economical installations
• Abrasion resistance helps eliminate cut-through and other damage that can occur during installation and use
• Available in 20 AWG - 4/O.
• Tinned copper strands are standard.
• Available in multi-conductor cables and shielded pairs