Soaking Pit Cables are specifically designed for extreme steel mill applications. Soaking Pit Cables are suitable for continuous operation at 200°C and short-term exposure to temperatures as high as 675°C. Scrap charging machines, soaking pit cranes, ladle transfer cars. #8/4 conductor, #6/4 conductor and #4/4 conductor are most common.
Learn MoreEnergy and Combustion
Thermal Wire and Cable resolves energy and combustion issues utilizing special electrical applications with high-voltage cable. Cable designed for 200C/250C/450C supplies the spark that is critical in combustion and burner applications. These products are cut and stripped with conventional equipment. They are laid in trays, conduits and suspended on offshore oil platforms, then subjected to intense heat and flames. Only the finest materials known to mankind are employed in a proprietary fashion when used as insulation and conductor materials. The smallest overall diameter is also a big engineering consideration because it includes fluid resistance, low coefficient of friction, bend and flex technology, and mandatory certification.
With more than 50 successful applications worldwide for thermal oxidizers, vapor control equipment, pilots and ignitors and flame rods, Thermal Wire and Cable has set the standard for product quality and reliability.
200°C (392°F) Type SRGK Multi-Conductor Flame Retardant Instrumentation Cable 600V
These cables are suitable for use in dry locations as instrumentation cables for installation above grade in conduit or in cable trays and in applications where high temperature resistance or flame resistance withy circuit integrity is required. They are especially suited for utility applications in conventional generating stations or industrial applications.
Learn More200°C PLTC 300V (Power Limited Tray Cable) UL Listed Unshielded
Thermal Wire and Cable PLTC Unshielded are designed for use as instrumentation, process control and computer cables in Class II or III Power-Limited Circuits as defined in NEC article 725. They may be installed in cable tray, in any raceway, as open runs of cable. The overall shield eliminates most of the static interference from the electric field radiating by power cables and other electrical equipment.
Learn More200°C Shielded 300V PLTC (Power Limited Tray cable) UL Listed
Thermal Wire and Cable PLTC Unshielded is designed for use as instrumentation, process control and computer cables in Class II or III Power-Limited Circuits as defined in NEC article 725. They are suitable for installation in wet or dry locations with conductor operating temperature up to 200°C. They may be installed in cable tray, in any raceway, as open runs of cable. UL Listed Type PLTC is authorized for above usage grade Class I, Division 2 hazardous locations.
Learn More200°C Shielded Multi-Conductor Plenum Cable
Thermal Wire and Cable PLTC shielded is designed for use as instrumentation, process control, and computer cables in Class II or III Power-Limited Circuits as defined in NEC Article 725. They are suitable for installation in wet or dry locations with conductor operating temperature up to 200°C. They may be installed in cable tray, in any raceway, as open runs of cable. UL Listed Type PLTC is authorized for above usage Grade Class I, Division 2 hazardous locations.
Learn MoreGas Turbine Multi-Core Electric Cable 450°C 600V
These multi-conductor cables are designed for a continuous operation at an ambient temperature range from -40C- +450C. Shielding is available as an option. Class H, flexible stranding, is employed and is of Nickel alloy material minimum nickel percentage 27%, and is oxygen-free high conductivity. Passes Mil-DTL-25038J Wet Dielectric test. Passes Shake and Bake Flame Test under vibration. Reduced diameter construction for installations in space limited areas. Fused PTFE tape design has been created for fluid susceptibility like Skydrol for corrosion purposes.
Learn MoreGas Turbine Single-Core Electric Cable 450°C 600V
These single conductor cables are designed for a continuous operation at an ambient temperature range from -40C- +450C. Class H, flexible stranding, is employed and is of Nickel alloy material minimum nickel percentage 27%, and is oxygen-free high conductivity. Passes Mil-DTL-25038J Wet Dielectric test. Passes Shake and Bake Flame Test under vibration. Reduced diameter construction for installations in space limited areas. Fused PTFE tape design has been created for fluid susceptibility like Skydrol for corrosion purposes. Shielding and armor were optional.
Learn MoreGas Turbine Single Conductor Cable 250°C 600V
These single conductor cables are designed for a continuous operation at an ambient temperature range from -40C- +250C. Flexible stranding, is employed and is of Nickel alloy material minimum nickel percentage 50MI, and is oxygen-free, high conductivity. Fused PTFE jacket and primary insulation passes ASTM D975-74 Diesel fuel oils, ASTM D1655-75 Standard Specification for Turbine fuels, ASTM D2880-76 Gas Turbine Fuel Oils, Mil-L-23699 Synthetic Oil, Splashing. A PTFE glass tape is applied for additional cut through resistance.
Reduced diameter construction for installations in space limited areas. Fused PTFE tape design have been designed for fluid susceptibility like skydrol for corrosion purposes.