Tray Cable is used for installation in trays, wire ways, troughs, channels ducts and conduit and designed to supply power motors, or for connection to other power devices.
Learn MoreEnergy and Combustion
Thermal Wire and Cable resolves energy and combustion issues utilizing special electrical applications with high-voltage cable. Cable designed for 200C/250C/450C supplies the spark that is critical in combustion and burner applications. These products are cut and stripped with conventional equipment. They are laid in trays, conduits and suspended on offshore oil platforms, then subjected to intense heat and flames. Only the finest materials known to mankind are employed in a proprietary fashion when used as insulation and conductor materials. The smallest overall diameter is also a big engineering consideration because it includes fluid resistance, low coefficient of friction, bend and flex technology, and mandatory certification.
With more than 50 successful applications worldwide for thermal oxidizers, vapor control equipment, pilots and ignitors and flame rods, Thermal Wire and Cable has set the standard for product quality and reliability.
250°C PLTC (Power Limited Tray Cable) UL Listed Unshielded 300V
Designed for use as instrumentation, process control and computer cables in Class II or III Power-Limited Circuits as defined in NEC article 725. They are suitable for installation in wet or dry locations with conductor operating temperature up to 250°C. They may be installed in cable tray, in any raceway, as open runs of cable. The overall shield eliminates most of the static interference from the electric field radiating by power cables and other electrical equipment.
Learn More250°C Shielded PLTC (Power Limited Tray Cable) UL Listed, 300 V
Designed for use in instrumentation, process control, and computer cables in Class II or III Power-Limited Circuits as defined in NEC Article 725. They are suitable for installation in wet or dry locations with conductor operating temperature up to 250°C. They may be installed in cable tray, in any raceway, as open runs of wire.
Learn More200°C (392°F) FEP Fluoropolymer Insulated Sensor / Instrumentation / Control Cable 600 Volt
Suitable for use in trays, industrial plants, and other areas where resistance to oils, acids, solvents and fluid are required. Not UL Listed. This cable is manufactured per quality manufacturing practices.
Learn More200°C (392°F) Modified FEP Insulated Shielded Tray Cable (TC) 600 Volt
Tray Cable are used for installation in trays, wireways, troughs, channels ducts and conduit and aerially where supported by a messenger.
Learn More200°C (392°F) Modified FEP Insulated Unshielded Tray Cable (TC) 600 Volt
Tray cables may use for installation in trays, wire ways, troughs, channels ducts and conduit and aerially where supported by a messenger.
Learn More200°C (392°F) Sensor and Instrumentation Cable FEP Insulation/ Silicone Rubber Jacket 600 Volt
This cable is designed for kilns, commercial cookers, sensors, thermal protection devices, lighting fixtures, plastics melting or similar applications requiring a flexible 200°C cable.
Learn More200°C (392°F) Silicone Rubber Multi-Conductor Cable 600V
Applications include: lighting equipment, rotating machinery, plastics machinery, high-temperature interconnect cable etc.
Learn More