Refineries and chemical processing plants where higher than ambient temperatures are encountered due to proximity to processing. Long kilns for curing bricks and tiles, multi point furnace temperature surveys when certification of temperature is needed for quality control. Also used for temperature measurement when preheating prior to forging and stress relieving after forging and similar applications.Learn More
Our wire and cable plays mission-critical roles in refinery trays, power cables, thermocouple temperature sensing, instrumentation cable for Scanners, burners and monitors and supplying electricity for motor leads. Our fire-rated cables can be used to replace expensive fire rated structures, blankets or wraps and the difficult
Our wire and cable play mission-critical roles in: refinery trays, power cables, thermocouple temperature sensing, instrumentation cable for scanners, burners and monitors and supplying electricity for motor leads.
Our fire-rated cables can be used to replace expensive fire-rated structures, blankets or wraps as well as the MI cable which can be difficult to install. Fire-resistive cables pass the extreme flame test standards of UL 2196/ULC S-139, European Standard IEC 60331 and Military Standard MIL-DTL-24643. Our 200C/250C/450C ignition cables are a compact design and are cut and terminated with conventional tools. They are chemical resistant and exhibit a very low coefficient of friction. Our low-voltage instrumentation cables are used for high heat and chemical-resistant applications where conventional cables have failed.
This cable eliminates the need to run cable in a pipe. A factory assembled cable consisting of 250C rated twisted, shielded pairs of K or KX thermocouple alloys. Then, a CLX (continuously corrugated and welded aluminum or stainless steel) or interlocked galvanized steel, aluminum interlock, or SWA (served wire armor) is applied which protects the core.Learn More
A factory assembled cable consisting of HEI single conductors up to a maximum voltage rating 10KVAC 25KVDC 250°C ignition cables and then they are cabled to form a round core.Learn More
Thermal Wire’s MTG Flexing Cable is expected to perform in the most extreme of applications. Some of which include Fire Zone areas, heating and curing systems, steel mill melt shops, ladle cars, heater bands and where a solid, proven lead wire is required to operate in extreme heat conditions, continuous bending and flexing and appliance applications.Learn More
This cable may use for internal wiring of domestic and commercial ovens, cooling appliances and similar very high temperature environments. Also ideal for use in wiring electric heaters and for lead and equipment wiring in iron and steel mills as well as glass plants and cement kilns.Learn More
This tray cable is used for installation in trays, wire ways, troughs, channels ducts and conduit and designed to supply power motors, or for connection to other power devices.Learn More
Tray Cable is used for installation in trays, wire ways, troughs, channels ducts and conduit and designed to supply power motors, or for connection to other power devices.Learn More
Designed for use as instrumentation, process control and computer cables in Class II or III Power-Limited Circuits as defined in NEC article 725. They are suitable for installation in wet or dry locations with conductor operating temperature up to 250°C. They may be installed in cable tray, in any raceway, as open runs of cable. The overall shield eliminates most of the static interference from the electric field radiating by power cables and other electrical equipment.Learn More