Multi conductor shielded 600V 200C series feature stranded silver-coated copper conductors, extruded PTFE insulation, and overall silver-coated copper braid shield and fused PTFE tape jacket. Manufactured in accordance with SAE-AS 22759/11. These multi conductor cables are designed for a continuous operation at an ambient temperature range from -60C- +200C. An optional PTFE impregnated tape is optional for enhanced cut through. Fused PTFE jacket and primary insulation passes ASTM D975-74 Diesel fuel oils, ASTM D1655-75 Standard Specification for Turbine fuels, ASTM D2880-76 Gas Turbine Fuel Oils, Mil-L-23699 Synthetic Oil, Splashing.
Learn MorePetroleum
Our wire and cable plays mission-critical roles in refinery trays, power cables, thermocouple temperature sensing, instrumentation cable for Scanners, burners and monitors and supplying electricity for motor leads. Our fire-rated cables can be used to replace expensive fire rated structures, blankets or wraps and the difficult
Our wire and cable play mission-critical roles in: refinery trays, power cables, thermocouple temperature sensing, instrumentation cable for scanners, burners and monitors and supplying electricity for motor leads.
Our fire-rated cables can be used to replace expensive fire-rated structures, blankets or wraps as well as the MI cable which can be difficult to install. Fire-resistive cables pass the extreme flame test standards of UL 2196/ULC S-139, European Standard IEC 60331 and Military Standard MIL-DTL-24643. Our 200C/250C/450C ignition cables are a compact design and are cut and terminated with conventional tools. They are chemical resistant and exhibit a very low coefficient of friction. Our low-voltage instrumentation cables are used for high heat and chemical-resistant applications where conventional cables have failed.
250°C (482°F) PTFE Insulated High-Voltage Lead Wire 25,000KVDC
PTFE high voltage ignition cable typical applications include, gas ignitor systems for furnaces, and internal wiring for electronic gas ignitor system.
Learn More250°C (482°F) SR-250 Silicone Rubber High-Voltage Lead Wire 25,000 VDC
SR-250 Silicone Rubber High-Voltage Lead Wire is used in gas appliance igniter systems.
Learn More250°C (482°F) Thermal Wire SRGE Flare Stack Cable 10KVAC 25KVdc Grade II
SRGE ignition lead wire is commonly used in flare stacks, blast furnace instrumentation, curing systems, glass fabrication, plastics manufacturing, fuel igniters, offshore oil rigs, etc.
Learn More150°C (302°F) ETFE Insulated High-Voltage Lead Wire 10,000 VAC
Electronic ignition or similar applications in gas ranges or gas or fuel oil burner systems.
Insulation Material Passes National Electrical Codes
150°C (302F°F) Silicone Rubber High-Voltage Lead Wire Up to a maximum 60 KVDC
High Voltage Lead wire is designed for use in stoves, heaters, furnaces, dryers, therapeutic devices, televisions, lighting fixtures, motors, or particular electronic devices. Insulated high voltage lead wire offers a wide service temperature range and outstanding dielectric qualities.
Learn More150℃ 4C 16 AWG Grundfos Pump MP1 Flat Cable (Euro and US versions)
Thermal Wire and Cable offers Grundfos Pump flat ribbon cable for various applications, including the 2″ Redi-Flo2 submersible pump.
Learn More90°C Thermaflame 1000 (continuous 750°C for 90 minutes) – Fire Rated Circuit Integrity Cable (CIC)
Thermal Wire and Cable’s Fire-rated Circuit Integrity Cable is suitable for the following applications: power and control instrumentation cables, power limited-circuit, fire suppression system, oven, furnaces, emergency lightning, overhead cranes, Control Emergency Shutdown Remote Operated Shut-off valves, Emergency Isolation Valves as found in petrochemical plants and refineries and Emergency Lighting.
Learn More